espresso trailer

The 13.1X6.5ft vintage coffee shop trailer is designed in compliance with federal codes and regulations in the USA, and its design and layout can be modified to meet standards in a specific state so that the smooth operation of your mobile coffee business can be ensured in your country. The mobile coffee trailer is fully loaded with workbenches, 3 compartment water sink with faucets, espresso machines, ice makers & bench fridge. You can get a fully equipped coffee shop trailer under $6,000!

8.2×9.8 vintage espresso trailer is ready for your mobile coffee shop business! This small coffee trailer includes stainless steel workbenches with plenty of room for storing and working, under-bench fridge for keeping your mike and cream at an ideal temperature, and best coffee machines for your business! Serve a cup of nice coffee to your customers on the street with this small expresso trailer!

This is a brand new espresso trailer for sale in the United States, mainly used for the mobile coffee shop trailer business. It is a 13ft custom-built coffee concession trailer, big enough for 2-3 people to work inside. It weighs about 1,000kg with commercial kitchen equipment that federal laws and regulations require, such as stainless steel workbenches, cabinets, vertical fridges, 3 compartments sinks with a hand sink, and gas burners. The espresso trailer for sale has a standard design and layout that make sure the safe operation of electric units from setting up and close down.

This is a 10.5×6.5 vintage espresso coffee trailer. The coffee bar trailer for sale has always been very popular and it was the right investment since most people drink coffee every day.
Uses: Selling coffee, baked goods
Staff: 1-3 staff

Coffee stand trailer for sale are becoming more and more popular because it saves a lot of cost and time compared to stores, such as no need to invest a lot of time and money for interior decoration. The same dining car can let you use it for 3-5 years without any problem, but the rent of the store is far less than the cost of coffee stand trailer for sale.
Also its convenience is no bill of lading, you can sell your products in different locations without being fixed in one location and cannot be moved.

Dimension:L400xW200xH230cm
Suitable persons:2-4 persons
Weight: 850kgs
Gross weight: 950kgs
Color: Customized
Produce time: 20-25 workdays.
Equipment: standard

External Wall: 40mm thickness XPS( Outside is Steel,Inner is Cotton Insulation,Inside is Steel) (Advantages of XPS: Good insulation,Compression resistance,Moisture proof, Light Weight,Good Corrosion,Eco-environmental), and 1.2mm cold rolled steel plate;

Working Table: 1.0mm thickness stainless steel & 8mm thickness wooden board; 6).Corridor: 1.0mm thickness galvanized sheet,8mm wooden board & 1.5mm non-slip aluminum sheet;

Electric System: 4square meter wires (220V cart),and 32A cable box,/ 6square meter wires (110V cart) and 64A cable box, 5pcs sockets,1.2m length light tube,2pcs tail lights,1pc of connector,1pc of external power socket,single wire system,and 2pcs reflectors;
Water Cycle System: Double stainless steel water sinks with 3000W (220V),1500W(110V),hot/cold water tap,12V/65W/5L per min/1Mpa automatic water pump,2x25Lplastic water tanks,and 1 water floor d

Customized starting a coffee trailer can provide corresponding equipment according to your specific needs, and then you can carry out related business.
Such as pizza carts, coffee carts, fast food carts, taco carts, etc.
For starting a coffee trailer, we can make 3D drawings according to specific business needs, including the location of the equipment, the specific size, and the feeling of the interior space, etc.check the specific time and price.

Dimension:L195xW160xH230cm
Suitable persons:1-2 persons
Weight: 400kgs
Gross weight:500kgs
Color: Customized
Produce time: 18-25 workdays.
Equipment: standard
Sliding window

.External Wall: 40mm thickness XPS( Outside is Steel,Inner is Cotton Insulation,Inside is Steel) (Advantages of XPS: Good insulation,Compression resistance,Moisture proof, Light Weight,Good Corrosion,Eco-environmental), and 1.2mm cold rolled steel plate;

Working Table: 1.0mm thickness stainless steel & 8mm thickness wooden board; 6).Corridor: 1.0mm thickness galvanized sheet,8mm wooden board & 1.5mm non-slip aluminum sheet;

Electric System: 4square meter wires (220V cart),and 32A cable box,/ 6square meter wires (110V cart) and 64A cable box, 5pcs sockets,1.2m length light tube,2pcs tail lights,1pc of connector,1pc of external power socket,single wire system,and 2pcs reflectors;
Water Cycle System: Double stainless steel water sinks with 3000W (220V),1500W(110V),hot/cold water tap,12V/65W/5L per min/1Mpa automatic water pump,2x25Lplastic water tanks,and 1 water floor d

As the most basic styles custom coffee trailer for sale, the round car and the square car are the most popular models we sell and are recognized by more and more customers. They can be used with more interior space and are also more cost-effective.
Of course, if your budget is sufficient, you can of course choose a more attractive new special-shaped car. The distinctive appearance can help you attract more people to watch and buy.
Custom coffee trailer for sale If you want to know more, please feel free to contact us at any time.

Weight: 450kgs
Gross weight: 550kgs
Color: Customized
Produce time: 10-15 workdays.
Equipment: standard

Frame: Body is 25mm*25mm*1.5mm galvanized square tube, Arc frame is 50mm*50mm*2.0mmgalvanized square tube;

Inside Wall: 3.5mm thickness aluminum plastic board (the back working bench is with a height of 30cm,1.0mm thickness stainless steel Panel),25mm thickness black insulation cotton;

External Wall: 1.2mm thick cold rolled steel plate;

Working Table: 1.0mm thickness stainless steel & 8mm thickness wooden board;

Customized coffee and donut trailer can provide corresponding equipment according to your specific needs, and then you can carry out related business.
Such as pizza carts, coffee carts, fast food carts, taco carts, etc.
For all coffee and donut trailer, we can make 3D drawings according to specific business needs, including the location of the equipment, the specific size, and the feeling of the interior space, etc.

Dimension:L195xW160xH230cm
Suitable persons:1-2 persons
Weight: 400kgs
Gross weight:500kgs
Color: Customized
Produce time: 18-25 workdays.
Equipment: standard
Color: black

Wheels: Single-axle or Dual-axle 165/70R13;

.Chassis: 50mm*100mm¡¢40mm*60mm *2.0mm¡¢ 50mm*70mm *2.5mm galvanized square tubes,and 4 lifting jacks;

Inside Wall: 3.5mm thickness aluminum plastic board (the back working bench is with a height of 30cm,1.0mm thickness stainless steel Panel);

.External Wall: 40mm thickness XPS( Outside is Steel,Inner is Cotton Insulation,Inside is Steel) (Advantages of XPS: Good insulation,Compression resistance,Moisture proof, Light Weight,Good Corrosion,Eco-environmental), and 1.2mm cold rolled steel plate;